Results 1 to 3 of 3

Thread: tpick calibrate

  1. #1

    Default tpick calibrate

    tpick attempts to calibrate despite having calibrate on startup set to no and calibrate count at 999:

    >;tpick
    --- Lich: tpick active.
    [tpick]>open my case
    That is already open.
    s>
    [tpick]>open my cloak
    That is already open.
    s>
    [tpick]>open my kit
    That is already open.
    s>
    [tpick: Putty remaining: 50]
    [tpick: Cotton balls remaining: 50]
    [tpick: Vials of acid remaining: 0]
    s>


    s>
    [tpick: Waiting 5 seconds for disk]
    [tpick: No disk found.]

    ####################
    ####################
    Boxes remaining: 1
    ####################
    ####################

    [tpick]>get #231304611
    You remove a sturdy steel trunk from in your black leather backpack.
    s>
    [tpick: Checking for traps.]
    [tpick]>disarm #231304611
    You carefully begin to examine a sturdy steel trunk for traps...

    You discover no traps.
    Roundtime: 7 sec.
    sR>
    [tpick: No trap found.]
    [tpick: Number of trap checks remaining: 2]
    [tpick: Checking for traps.]
    [tpick]>disarm #231304611
    You carefully begin to examine a sturdy steel trunk for traps...

    You discover no traps.
    Roundtime: 5 sec.
    sR>
    [tpick: No trap found.]
    [tpick: Number of trap checks remaining: 1]
    [tpick: Checking for traps.]
    [tpick]>disarm #231304611
    ...wait 1 seconds.
    s>
    [tpick]>disarm #231304611
    You carefully begin to examine a sturdy steel trunk for traps...

    You discover no traps.
    Roundtime: 5 sec.
    sR>
    [tpick: No trap found.]
    [tpick: Measuring lock.]
    [tpick]>get my calipers
    You remove a set of professional calipers from in your tool kit.
    s>
    [tpick]>lmaster measure #231304611
    Please rephrase that command.
    s>

    If I throw my calipers on the ground it still errors out trying to find them (even without a container for calipers selected):

    You discover no traps.
    Roundtime: 7 sec.
    sR>
    [tpick: No trap found.]
    [tpick: Measuring lock.]
    [tpick]>get my calipers
    Get what?
    s>
    [tpick: Couldn't find your calipers.]
    s>
    Total boxes picked: 0
    Total silvers gained: 0
    --- Lich: tpick has exited.
    Last edited by Alashir; 01-11-2020 at 08:54 PM.
    The only rude person I met was a taxi driver in kagoshima. I was going from the train station to the ferry to take it over to an island and was showing him my papers and he was like "oh, climb mountain?" and I'm like "hai, yep!" and he made a muscle pose(bent arm, whatever you call it) laughed, and rubbed my belly.. like "oh, no, you fat american fuck, you no get up there", but whatever - Japhrimel

  2. #2

    Default

    If you're a rogue the script will always attempt to measure the lock if you start the script up like normal.

    If you always want to use a vaalin lockpick start the script as:

    ;tpick v

    If you want to start with a copper lockpick (or whatever you have in the copper lockpick variable in the setup menu) and work up to higher lockpicks if copper isn't cutting it then start the script as:

    ;tpick c
    Last edited by Tgo01; 01-11-2020 at 08:59 PM.

  3. #3

    Default

    Thanks Tgo.
    The only rude person I met was a taxi driver in kagoshima. I was going from the train station to the ferry to take it over to an island and was showing him my papers and he was like "oh, climb mountain?" and I'm like "hai, yep!" and he made a muscle pose(bent arm, whatever you call it) laughed, and rubbed my belly.. like "oh, no, you fat american fuck, you no get up there", but whatever - Japhrimel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •