Jarvan
09-04-2014, 02:12 AM
MB on all these is 100k
Once twice thrice deal.
If you really want to offer a BO go ahead, I may accept.
For anyone wondering, I used the slab cutter to show exact weights, I did not pull the cutter at any point.
1)You slide your kelyn slab down a bit so that the slab-cutter will now cut it into a 7lb. piece and a 9lb. piece. (16 Lbs)
CB - 100K Izalude Sold
2)You slide your razern slab down a bit so that the slab-cutter will now cut it into a 7lb. piece and a 9lb. piece. (16 Lbs)
CB -
3)You've just set the slab-cutter to cut your eonake slab into a 9lb. piece and a 10lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (19 Lbs)
CB - 750k Izalude Sold
4)You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 8lb. piece and a 10lb. piece. (18 Lbs)
CB - 300k RAR Sold
5)You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 4lb. piece and a 6lb. piece. (10 Lbs)
CB - 200k RAR Sold
6)You've just set the slab-cutter to cut your rolaren slab into a 12lb. piece and a 13lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (25 Lbs)
CB - 500k RAR Sold
7)You've just set the slab-cutter to cut your razern slab into a 12lb. piece and a 13lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (25 Lbs)
CB -
8)You've just set the slab-cutter to cut your white ora slab into a 7lb. piece and a 8lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (15 Lbs)
CB - 100k ROTOR Sold
Once twice thrice deal.
If you really want to offer a BO go ahead, I may accept.
For anyone wondering, I used the slab cutter to show exact weights, I did not pull the cutter at any point.
1)You slide your kelyn slab down a bit so that the slab-cutter will now cut it into a 7lb. piece and a 9lb. piece. (16 Lbs)
CB - 100K Izalude Sold
2)You slide your razern slab down a bit so that the slab-cutter will now cut it into a 7lb. piece and a 9lb. piece. (16 Lbs)
CB -
3)You've just set the slab-cutter to cut your eonake slab into a 9lb. piece and a 10lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (19 Lbs)
CB - 750k Izalude Sold
4)You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 8lb. piece and a 10lb. piece. (18 Lbs)
CB - 300k RAR Sold
5)You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 4lb. piece and a 6lb. piece. (10 Lbs)
CB - 200k RAR Sold
6)You've just set the slab-cutter to cut your rolaren slab into a 12lb. piece and a 13lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (25 Lbs)
CB - 500k RAR Sold
7)You've just set the slab-cutter to cut your razern slab into a 12lb. piece and a 13lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (25 Lbs)
CB -
8)You've just set the slab-cutter to cut your white ora slab into a 7lb. piece and a 8lb. piece. If that's where you want it, go ahead and PULL slab-cutter. (15 Lbs)
CB - 100k ROTOR Sold