Slamy
06-26-2013, 09:00 AM
This is a very old tower shield that has a harness in it that will hold your weapon. It was enchanted by me to 5x. You don't see many of these around anymore.
gone
You tap a cross-gilt silver tower shield, which is in your right hand.
On the reverse of the shield, a complex webbing of oiled leather straps and polished buckles forms an intricate arm harness. The straps are arranged in a pattern that appears able to secure a weapon within.
>turn shield
You place your shield on the floor and place one foot on it and kneel down. Unlacing the harness, you carefully inspect the straps and buckles for signs of wear. Carefully, you weave the braided leather into the buckles and cinch it tightly.
You remove a thick illthorn staff crowned with a cube of emerald blazestar from in your goblin battle cloak.
>put staff in shield
You unbuckle the oiled leather harness of your shield. Carefully, you slide your staff into the webbing, and then cinch it tightly.
>rub shield
You carefully work the straps holding your staff in place free so you can remove it.
>rub shield
You examine your shield for scars or imperfections. Flipping it over, you adjust the leather harness, taking care to adjust the tangle of straps and buckles to a perfect fit.
>get sta
You reach into the tangle of straps and buckles on your harness and pull out your illthorn staff.
gone
You tap a cross-gilt silver tower shield, which is in your right hand.
On the reverse of the shield, a complex webbing of oiled leather straps and polished buckles forms an intricate arm harness. The straps are arranged in a pattern that appears able to secure a weapon within.
>turn shield
You place your shield on the floor and place one foot on it and kneel down. Unlacing the harness, you carefully inspect the straps and buckles for signs of wear. Carefully, you weave the braided leather into the buckles and cinch it tightly.
You remove a thick illthorn staff crowned with a cube of emerald blazestar from in your goblin battle cloak.
>put staff in shield
You unbuckle the oiled leather harness of your shield. Carefully, you slide your staff into the webbing, and then cinch it tightly.
>rub shield
You carefully work the straps holding your staff in place free so you can remove it.
>rub shield
You examine your shield for scars or imperfections. Flipping it over, you adjust the leather harness, taking care to adjust the tangle of straps and buckles to a perfect fit.
>get sta
You reach into the tangle of straps and buckles on your harness and pull out your illthorn staff.