Mohrgan
06-05-2013, 08:11 PM
I have 137 pounds of fresh, uncut rolaren slabs, as weighed by the slab-cutter, in the form of 7 "heavy rolaren slabs." A nice little pile to give someone who has the patience to actually do it a crack at making a perfect.
MB 10m
CB
You've just set the slab-cutter to cut your rolaren slab into a 9lb. piece and a 10lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 7lb. piece and a 9lb. piece.
You've just set the slab-cutter to cut your rolaren slab into a 11lb. piece and a 12lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 11lb. piece and a 13lb. piece.
You've just set the slab-cutter to cut your rolaren slab into a 10lb. piece and a 11lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You've just set the slab-cutter to cut your rolaren slab into a 7lb. piece and a 8lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You've just set the slab-cutter to cut your rolaren slab into a 9lb. piece and a 10lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
MB 10m
CB
You've just set the slab-cutter to cut your rolaren slab into a 9lb. piece and a 10lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 7lb. piece and a 9lb. piece.
You've just set the slab-cutter to cut your rolaren slab into a 11lb. piece and a 12lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You slide your rolaren slab down a bit so that the slab-cutter will now cut it into a 11lb. piece and a 13lb. piece.
You've just set the slab-cutter to cut your rolaren slab into a 10lb. piece and a 11lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You've just set the slab-cutter to cut your rolaren slab into a 7lb. piece and a 8lb. piece. If that's where you want it, go ahead and PULL slab-cutter.
You've just set the slab-cutter to cut your rolaren slab into a 9lb. piece and a 10lb. piece. If that's where you want it, go ahead and PULL slab-cutter.