;lnet issues

[Khystra]

okay, long story...short.

Old hard drive with lich installed....failed. No longer working
New hard drive with lich installed...lnet not working. I am successfully running narost and infomon, and upon logging in, it tells me that lnet is also active. However....it closes itself. When I set it to bring lnet back up...this is what I get...

>;lnet
--- Lich: lnet active.
[lnet: To attempt to log in with a different password, type: ;lnet password=<password>]
--- Lich: lnet has exited.
>

I have no memory of lnet EVER requiring a password before.

Could this possibly be related to the fact that I had previously installed lich and it remembers? Is there a way to override this so that I may gain access to lnet again? Any help would be greatly appreciated.

[Nilandia]

Lnet doesn't require a password normally, but if you tell it to save a password for that character, it will.

From ;lnet help:

;lnet password=<password> protect your character name on the server with a password
;lnet email=<email> save your email address on the server for password recovery

Hopefully you also included an e-mail to get your password back!

Gretchen

[Tordane]

Lnet doesn't require a password normally, but if you tell it to save a password for that character, it will.

From ;lnet help:

;lnet password=<password> protect your character name on the server with a password
;lnet email=<email> save your email address on the server for password recovery

Hopefully you also included an e-mail to get your password back!

Gretchen

Email recovery was not available the last I looked. You will need to speak with Tillmen.

Passwords are required if you created/moderate channels on LNet.

[Khystra]

I have sent a message to Tillmen, and am still waiting for a response...I was hoping that someone else may have had a similar issue and was able to shed some light.

Thank you for your responses though, they are truly appreciated!!

ang

[Khystra]

Thank you Tillmen for your help in getting me back onto lnet!!

:)