Nazagor
08-16-2016, 08:07 PM
Hell, I almost want to go blunt and board to keep this ridiculawesome beast, but I could use the silver to get myself some good plate. Plus I love lances. So, here we go:
a mysterious fiery glaes wallshield
8 lbs (very light for glaes--a regular glaes tower shield would weigh 18 lbs), MEDIUM size. You should be able to convert it to tower (or maybe large as well?) with an assist, if you wish.
Show description:
Gazing into the eyes of the mongrel emblazoned on the shield, you blink as your surroundings seem to fade like shadows, and a halo of fire surrounds its bearer. You wince involuntarily as a deep-throated growl escapes from the shield-dog's snarling maw--you quickly close your eyes as you imagine those deadly claws upon you, but all is normal when you open them again. On the reverse of the wallshield, a complex webbing of oiled leather straps and polished buckles forms an intricate arm harness. The straps are arranged in a pattern that appears able to secure a weapon within.
CB: SOLD to Kazner
BO: 30m
You analyze your fiery glaes wallshield and sense that the item is largely free from merchant alteration restrictions.
The creator has also provided the following information:
You get a strong sense that the wallshield can be altered by any merchant as long as the harness" remains in place.
Currently you are able to use DROP, RUB (Get Weapon), TURN, COWER, and PUNCH/KILL/SLAP/BATTER on the fiery glaes wallshield. The size of the weapon that can be stored in the wallshield's harness is dependent on the size of the shield.
You might be able to have a talented merchant lighten the fiery glaes wallshield for you.
rub:
You examine your wallshield for scars and imperfections. Flipping it over, you adjust the leather harness attached to the wallshield, taking care to adjust the tangle of straps and buckles to a perfect fit.
put weapon in wall:
You unbuckle the oiled leather harness of your wallshield. Carefully, you slide your star into the webbing, then cinch it tightly.
rub wall:
You carefully work the straps holding your star in place free so that you can remove it.
get star from wal:
You reach into the tangle of straps and buckles on your harness and pull out your drake morning star.
turn wall:
You place your wallshield on the floor and place one foot on it and kneel down. Unlacing the harness, you meticulously inspect the straps and buckles for signs of wear. Carefully, you weave the braided leather into the buckles and cinch it tightly.
punch/kill/slap wall:
You clench your hand into a fist and proceed to bang it up against the front of your fiery glaes wallshield as hard as you can. You succeed in producing only a very slight din, and it feels like you may have broken a finger!
a mysterious fiery glaes wallshield
8 lbs (very light for glaes--a regular glaes tower shield would weigh 18 lbs), MEDIUM size. You should be able to convert it to tower (or maybe large as well?) with an assist, if you wish.
Show description:
Gazing into the eyes of the mongrel emblazoned on the shield, you blink as your surroundings seem to fade like shadows, and a halo of fire surrounds its bearer. You wince involuntarily as a deep-throated growl escapes from the shield-dog's snarling maw--you quickly close your eyes as you imagine those deadly claws upon you, but all is normal when you open them again. On the reverse of the wallshield, a complex webbing of oiled leather straps and polished buckles forms an intricate arm harness. The straps are arranged in a pattern that appears able to secure a weapon within.
CB: SOLD to Kazner
BO: 30m
You analyze your fiery glaes wallshield and sense that the item is largely free from merchant alteration restrictions.
The creator has also provided the following information:
You get a strong sense that the wallshield can be altered by any merchant as long as the harness" remains in place.
Currently you are able to use DROP, RUB (Get Weapon), TURN, COWER, and PUNCH/KILL/SLAP/BATTER on the fiery glaes wallshield. The size of the weapon that can be stored in the wallshield's harness is dependent on the size of the shield.
You might be able to have a talented merchant lighten the fiery glaes wallshield for you.
rub:
You examine your wallshield for scars and imperfections. Flipping it over, you adjust the leather harness attached to the wallshield, taking care to adjust the tangle of straps and buckles to a perfect fit.
put weapon in wall:
You unbuckle the oiled leather harness of your wallshield. Carefully, you slide your star into the webbing, then cinch it tightly.
rub wall:
You carefully work the straps holding your star in place free so that you can remove it.
get star from wal:
You reach into the tangle of straps and buckles on your harness and pull out your drake morning star.
turn wall:
You place your wallshield on the floor and place one foot on it and kneel down. Unlacing the harness, you meticulously inspect the straps and buckles for signs of wear. Carefully, you weave the braided leather into the buckles and cinch it tightly.
punch/kill/slap wall:
You clench your hand into a fist and proceed to bang it up against the front of your fiery glaes wallshield as hard as you can. You succeed in producing only a very slight din, and it feels like you may have broken a finger!